cybersecurity-sample
surveillance
Dahua

How to connect P2P via smartPSS

 

 

1.       Start SmartPSS, click on setting Device

2.       Click Add button to add new device

 

 

3.       Choose SN (for device support P2P) from the method to add.

 

4.       Fill in the Device Name, SN, username and password then click Add. This information is based on your recorder setting.

 

5.       You will see this line if you have successfully add the device via P2P.

 


Howto backup file from smartpss

SmartPSS/Backup

Description

This allows you to back up videos on SmartPSS.

Prerequisites

§  SmartPSS installed on a Windows or Mac computer

§  Dahua NVR with a stored recording

§  Established network connection with the NVR

§  The NVR added to SmartPSS

§  Enough drive space for the video backup

§   

Step by Step Instructions

 

 

1. From the Home Page on SmartPSS select the “PlayBack Button”

 

2. From the PlayBack Page on the right hand side select“Camera or Channel” for the footage you need to backup. Multiple cameras or channels may be selected.

 

3 . Select "Record or Picture" for the content you would like to backup.

 

4. Select which one of the options "Type" (such as Motion Detection) you nedd to backup.

 

5. Select the stream "Main or Sub".

 

 

6. Select and choose “Date and time” .

 

7. Select "Search".

 

 

8. Select or Check which footage you need to export or download. Video footage can be viewed by clicking on the "Play" button and by selected events.

 

 

9. You may trim the video footage if the "Record tab" is selected. You will need to click the scissor or trim icon to trim the selected video.

 

10. On the "Event" tab you will need to select or check the events you want to save e.g (1, 2, 3, 4). Multiple videos may be selected to export.

 

11. Click on the disk icon to save and start the export.

12. Select "Path" You would like to save to . You can save it to a specific folder.

 

 

13. Select "Export Format" (Original Format, ASF, AVI, MP4) and click "OK"

 

 

14. The progress can be viewed clicking on the "Export Progress" icon.

 



How to setup RFID CARD to be used in a working environment

 

Assuming a customer have these products:

No Item & Description Picture 1

Magnetic door lock, adjust the amount to match the number of doors.

In example: AL-280(LED).

Connect to:

-          Panel RFID via 2 cable wiring v+ and v-

Function:

For lock / unlock the door.  2

Panel RFID, adjust the amount to match the number of doors,

min 2 unit without exit button

or 1 unit with exit button.

In example: ASI1201A-D

Connect to:

-          Computer Network via utp cable

-          Panel RFID via 2 cable wiring v+ and v-

Function:

-          For reading the RFID card, user tap the RFID card to this device to start reading process

3

Card Enrollment, 1 unit. (OPTIONAL)

In example: ASM100

Connect to:

-          Computer via USB port

Function:

For transferring user access data from computer to RFID Card 4

RFID card, adjust the amount to match the number of user

In example: any RFID card is possible

 

Function:

-          Its function is similar to key. User have this card can open the door.

5

Computer (either laptop or PC), 1 unit

The computer should be able to:

-          Install and run Software SmartPSS

-          Connected to network via cable UTP.

-          Connected to Card Enrollment via USB port

 

Function:

-          SmartPSS is used for transferring the data to Panel RFID via computer network.

USB port connecting to Card Enrollment for transferring data from computer to the RFID card

 

 

Setup diagram Scenario 1:

How It Works (Scenario 1):

1.       All RFID card came with a unique serial number that can be read via Access Control (in this case ASI1201A / ASI1201A-D). The Access Control (in this case ASI1201A / ASI1201A-D) then will transfer the serial number to computer.

2.       With the help from Smart PSS then computer will:

a.       Create sequence number based on detected Access Control (in this case ASI1201A / ASI1201A-D).

b.      Assign the sequence number to each card unique serial number.

3.       This assignment (step 2b) then will be transferred to the Access Control (in this case ASI1201A / ASI1201A-D). to be memorized.

4.       When user tap an RFID Card to Access Control (in this case ASI1201A / ASI1201A-D), then the access control will read the unique serial number form the RFID card then compared with unique serial number stored inside the Access Control (in this case ASI1201A / ASI1201A-D).

If the unique serial number between stored inside the Access Control and the RFID Card matched each other, then Access Control will control the Door Magnetic Lock (in this case AL280(LED)) to open the door.

 

 

Setup diagram Scenario 2: 

How It Works (Scenario 2):

1.       All RFID card came with a unique serial number that can be read via Card Enrollment Reader such as ASM100 ASM100-D.

2.       The Card Enrollment Reader then will transfer the serial number to computer.

With the help from Smart PSS then computer will:

a.       Create sequence number based on detected Access Control (in this case ASI1201A / ASI1201A-D).

b.      Assign the sequence number to each card unique serial number.

3.       This assignment (step 2b) then will be transferred to the Access Control (in this case ASI1201A / ASI1201A-D). to be memorized.

4.       When user tap an RFID Card to Access Control (in this case ASI1201A / ASI1201A-D), then the access control will read the unique serial number form the RFID card then compared with unique serial number stored inside the Access Control (in this case ASI1201A / ASI1201A-D).

 

5.       If the unique serial number between stored inside the Access Control and the RFID Card matched each other, then Access Control will control the Door Magnetic Lock (in this case AL280(LED)) to open the door.

 




Page 1 of 3